This Website Is Dedicated To The Sachs Madass.
A Great Fun Little Bike Which Is Like A Moped On Steroids
Madass 125 Stock Carb Strip
Remove Bolts & Nuts
Unscrew slide before removing carb from bike ( picture is of a spare carb which has already been removed. Cap will have throttle cable and slide attached)
Drain the floatbowl with the drain screw
Remove the floatbowl screws
Make sure bowl is clean and seal is in good shape
Jets. Unscrew them carefully with a slotted screwdriver. Best to do them one at a time
Main jet assembly. Make sure all the holes and the inside is clean. If you do not have jet cleaning files use a pin. Take care not to change the size of the holes. Do not overtighten when refitting and make sure they are inserted in the order shown
Pilot jet. Clean all holes.If you do not have jet cleaning files use a pin. Take care not to change the size of the holes.  Do not ovetighten when refitting
Float and needle. Make sure the floats and the needle is clean and the rubber tip is still flexible
Make sure the float jet is clean
Use carb cleaner to wash all metal parts.Do not get carb cleaner on rubber parts. If you do not have jet files use a wire removed from a wire brush